( clamp mount type with solder lugs )
JJ Brand : Features and Specifications
:- All Electrolytics are new "factory fresh" stock. We do not sell NOS (new old stock).
- Working Voltage (WVDC) is 500 Volts.
- Low impedance / Low ESR / Wide Frequency Range.
- Ideal for: Music Industry Applications; Hi-End Electronics; Power Supplies (filter capacitors); Industrial Electronics.
- Solder Tag Connections (ideal for hand wired circuits). These are not snap-in type.
- uF Sizes: 32uF+32uF; 100uF+100uF. Dimensions available. Dimensions also per below chart.
- Clamp Mounted. Clamps are sold separately.....use 1 3/8" dia. (35mm). Yes, we also sell JJ clamps if you need them. See Capacitor Clamps for Vertical Mount Can type Electrolytic Capacitors
- Construction: Aluminum Case and Solder Lugs.
- Safety Vent located at End-Deck.
- Black PVC Sleeve Insulation (with red lettering).
- Operating temperature:
-25C to +65C. - Dissipation Factor: ,20 (pri 100Hz, 20C)
- Leakage Current: I=0,005.C.U. (after 5 minutes of rated voltage)
- Diameter: 1 3/8" (35mm)
- ISO 9001:2001 certified
- Capacitance tolerance:
-10% / +30% (100Hz, 20C). - 100% RoHS Compliant
RG ( Richey GOLDS ) Features and Specifications:
- All Electrolytics are brand new "factory fresh" stock.
- Originally developed for the Japanese audiophile market.
- Working Voltage (WVDC) is 500 Volts. (It is perfectly fine to replace lower V such as 475V, 450V, 385V, etc with 500V).
- Lowest impedance / Lowest ESR / Widest Frequency Range.
- Specifically designed for audio power amplifier use. (filter capacitors in power supplies of guitar, HiFi, Stereo amps / audio equipment).
- Tin plated COPPER Solder Lug Connections (ideal for hand wired circuits). M-Benz lug arrangement.
- uF Sizes: 10uF+10uF; 16uF+16uF; 20uF+20uF; 22uF+22uF; 30uF+30uF; 33uF+33uF; 47uF+47uF; 50uF+50uF Dimensions available. Dimensions also per below chart.
- Clamp Mounted. Clamps are sold separately.....use 1" dia. (25mm) for 10uF/16uf/20uF/30uF & 33uF and 1 3/8" (35mm) for 47uF & 50uF. Yes, we also sell capacitor clamps. See Capacitor Clamps for Vertical Mount Can type Electrolytic Capacitors
- Construction: Japanese ultra low impedance aluminum foils for lowest ESR/DF.
- Black PVC Sleeve Insulation (with gold lettering).
- Operating temperature:
-25C to +85C. - Dissipation Factor: Tan o (max.) 0.25 (120Hz, 20C)
- Impedance Radio / Stability at Low Temperature:
Z(-25C)/Z(20C) = 8 (at 120Hz) - Leakage Current: I is less or = 0.03CV or 5 mA, whichever is smaller after 5 minutes application of rated voltage.
- Diameter: 1 3/8" (35mm) for 47uF & 50uF and 1" (25mm) for 10uF, 16uF, 20uF, 22uF, 30uF and 33uF
- ISO 9001:2000 certified
- Capacitance tolerance:
-20% / +20% (120Hz, 20C). - 100% RoHS Compliant
Other High Voltage Capacitors
:Metalized Polypropylene Capacitors- 630V & 1000VAxial Tubulars
Metallized Polyester Film Capacitors - 630V & 1000VAxial Tubulars
jb JFX Premium Metallized Polypropylene Capacitors - 630V & 400V Axial TubularsMetal-Foil Polypropylene Capacitors - 630V Orange Dips
Metallized Polyester Film Capacitors - 630V Orange Dips
Metallized Polypropylene Capacitors- 1600V Orange Dips
Silver MICA Capacitors- 500 Volts
Mylar Film Capacitors - 630 Volt
Ceramic Disc Capacitors - 1600 Volt
High Voltage Electrolytic Capacitors- Radials
High Voltage Electrolytic Capacitors- Axials
Single Section Can Electrolytic Capacitors - 500 Volts
Capacitor Clamps for Can Electrolytic Capacitors
X1/Y2 Disc Safety Capacitors - 250VAC
Y2 Film Safety / Interference Suppression Capacitors - 250VAC
X2 Film Safety / Interference Suppression Capacitors - 275VAC
Capacitors and Schematics for Antique Tube Radios
These clamp mount capacitors are easy to mount with capacitor clamps (YES...we also carry clamps.) All of our can capacitors come with solder tag terminals....ideal for hand wired circuits.
About JJ Capacitors:
JJ Electronics is a former subsidiary of TELSA (established as Elektra in 1921 and renamed TELSA in 1946). JJ Electronics has been manufacturing high quality vacuum tubes under it name since 1994 and added capacitors and amps to its product line ten years ago. JJ has earned an excellent reputation for making tubes and capacitors that excel in music industry applications. The slogan of JJ is "Excellence with Every Decibel".
About RG (
Richey GOLDS ):
RG (
Richey GOLDS ) were originally developed for the Japanese audiophile market under the Unicon nameplate. JustRadios is honoured to be able to now offer these audio grade capacitors world-wide. These electolytic capacitors have been specifically designed for use as filter capacitors in power supplies of high-end audio amplifiers. Special features of these audio grade electrolytic capacitors include: ultra low impedance Japanese aluminum foil construction and the use of pure copper solder lugs (coated with a thin tin plating over the copper to protect the base metal from oxidation, thus preserving its solderability). Audio grade means lowest ESR/DF, but most important is an extra internal damping. With Black Gate WKZ capacitors out of production and no longer available at reasonable prices, Richey GOLDS are an excellent alternative.
Richey GOLDS are by Richey Electronics Ltd. Richey have been making top quality electrolytics for almost 50 years (since incorporation in Nashville, Tennessee in 1965).
