|
Resistor Kits Now Available
note: K = Kohm = 1000 ohms and M = Mohm = 1,000,000 Ohms |
Resistors Included in Resistor Kit |
|
Resistor Kit # 1A :
219 Premium
RCD Carbon Composition Resistors
5% Tolerance
This kit contains 219 premium carbon composition resistors .... 3 each of all 73 sizes 10 ohm thru 10M ohm.
RCD of New Hampshire, USA has been committed to quality for over 40 years. RCD Headquarters and Manufacturing Facility are at Manchester, New Hampshire, USA. Additional RCD products are produced in Europe, the Caribbean and Asia.
Construction:
These brand new factory fresh RCD carbon composition resistors feature rugged hot molded construction. The resistance material, insulation material and lead wires are all hot molded together at the same time into one solid integrated resister. The result of this hot molded construction is a resistor that is mechanically strong without any cracks or crevices that could adversely affect performance. Total length of each resistor is 60mm with body size 3.56mm by 9.53mm. 100% non-inductive construction for pure resistance.
Features:
"Classic" vintage resistor appearance and that warm tube sound of yesteryear. Ideal for tube radios, amps, TVs, etc.
Wattage: 1/2 watt rating.
Tolerance: +/- 5%
Operating Temperature Range: -55C to +150C ( this is a full 25 degrees better/higher than most carbon comp resistors, resulting in greater reliability and longer life in high operating temperature environments)
Working Voltage: 350V
Overload Voltage: 700 volts
Peak Pulse Voltage: 10KV
High Surge/Pulse Capability.
High insulation to protect against shorts.
ISO 9001:2000 certified and 100% RoHS compliant.
Proudly made RCD (Headquarters HN,USA).
|
219 Premium RCD Carbon Composition 1/2W Resistors
(3 each of all 73 sizes : 10 ohm thru 10 Meg ohm)
3 each of all of the following 73 ohm values:
OHMS
10,
12,
15,
18,
27,
33,
39,
47,
56,
68,
82,
100,
120,
150,
180,
200,
220,
240,
270,
330,
470,
510,
560,
680,
820,
1.0K,
1.2K,
1.5K,
1.8K,
2.2K,
2.4K,
2.7K,
3.3K,
3.9K,
4.7K,
5.1K,
5.6K,
8.2K,
10K,
12K,
15K,
18K,
20K,
24K,
27K,
33K,
39K,
47K,
56K,
68K,
82K,
100K,
120K,
150K,
180K,
220K,
330K,
390K,
470K,
510K,
680K,
820K,
1.0M,
1.5M,
2.0M,
2.2M,
2.7M,
3.3M,
3.9M,
4.7M,
5.6M,
6.8M,
and
10M ohms all at 1/2 Watt.
8 feet of spaghetti tubing
Kit #1A Price: $124.98
Add to Cart at Bottom of Page
|
|
Resistor Kit # 1B :
237 Classic 10% Tolerance
Carbon Composition Resistors
by KAMAYA OHM
Never run short of the resistor size you need. This kit contains 237 Classic carbon composition resistors .... 3 each of all (79) sizes 2.2 ohm thru 22M ohm.
Construction: Brand new stock carbon composition resistors by KAMAYA OHM via their ISO 14001/9001 certified Japan production facility. The resistance material, insulation material and lead wires are all hot molded together at the same time into one solid integrated resister. The result of this hot molded construction is a resistor that is mechanically strong without any cracks or crevices that could adversely affect performance. Total length of each resistor is 62mm (aprox 2 1/2" long) with body size 3.5mm by 9.5mm. 100% non-inductive construction for pure resistance.
Features:
"Classic" vintage resistor appearance and tolerance for that warm tube sound of yesteryear. Ideal for tube amps, radios, TVs, etc.
Improved pulse endurance characteristics compared to carbon-film resistors.
Wattage: 1/2 watt rating.
Tolerance: Classic +/- 10% (the most popular tolerance found in vintage of tube radios)
Operating Temperature Range: -55C to +125C
Limiting Element Voltage: 350V
Isolation Voltage: 500 volts
Predictable and reliable performance.
High insulation to protect against shorts.
100% RoHS compliant.
Quality Production by ISO 14001:9001 certified KAMAYA OHM.
|
237 Classic 10% Carbon Composition 1/2W Resistors
(3 each of all 79 sizes : 2.2 ohm thru 22 Meg ohm)
3 each of all of the following 79 different ohm sizes:
OHMS
2.2ohms, 2.7ohms,
3.9ohms, 4.7ohms, 5.6ohms,
6.8 ohms, 8.2 ohms,
10 ohms,
12 ohms,
15 ohms,
18 ohms, 20 ohms,
22 ohms,
27 ohms,
33 ohms,
39 ohms,
47 ohms,
56 ohms,
68 ohms,
82 ohms,
100 ohms,
120 ohms,
180 ohms,
200 ohms,
220 ohms,
270 ohms,
330 ohms,
390 ohms,
470 ohms,
560 ohms,
680 ohms,
820 ohms,
1.0K ohms,
1.2K ohms,
1.5K ohms,
1.8K ohms,
2.0K ohms,
2.2K ohms,
2.7K ohms,
3.3K ohms,
3.9K ohms,
4.7K ohms,
5.0K ohms,
5.6K ohms,
6.8K ohms,
8.2K ohms,
10K ohms,
12K ohms,
15K ohms,
18K ohms,
20K ohms,
22K ohms,
33K ohms,
47K ohms,
68K ohm,
82K ohms,
100K ohms,
120K ohms,
150K ohms,
180K ohms,
220K ohms,
270K ohms,
330K ohms,
470K ohms,
560K ohms,
680K ohms,
820K ohms,
1.0M ohms,
1.2M ohms,
1.5M ohms,
1.8M ohms,
2.0M ohms,
2.2M ohms,
2.7M ohms,
4.7M ohms,
8.2M ohms,
10M ohms,
18M ohms,
& 22M ohms
all at 1/2 Watt.
8 feet of spaghetti tubing
Kit #1B Price: $124.98
Add to Cart at Bottom of Page
|
|
Resistor Kit # 1C :
212 Premium
RCD Carbon Composition Resistors
5% Tolerance
Never run short of the resistor size you need. This kit contains 212 premium carbon composition resistors .... 2 each of all 106 sizes 10 ohm thru 20M ohm.
RCD of New Hampshire, USA has been committed to quality for over 40 years. RCD Headquarters and Manufacturing Facility are at Manchester, New Hampshire, USA. Additional RCD products are manufactured in Europe, the Caribbean and Asia.
Construction:
These brand new factory fresh RCD carbon composition resistors feature rugged hot molded construction. The resistance material, insulation material and lead wires are all hot molded together at the same time into one solid integrated resister. The result of this hot molded construction is a resistor that is mechanically strong without any cracks or crevices that could adversely impact performance. Total length of each resistor is 60mm with body size 3.56mm by 9.53mm. 100% non-inductive construction for pure resistance.
Features:
"Classic" vintage resistor appearance and that warm tube sound of yesteryear. Ideal for tube radios, amps, TVs, etc.
Wattage: 1/2 watt rating.
Tolerance: +/- 5%
Operating Temperature Range: -55C to +150C ( this is a full 25 degrees better/higher than most carbon comp resistors, resulting in greater reliability and longer life in high operating temperature environments)
Working Voltage: 350V
Overload Voltage: 700V
Peak Pulse Voltage: 10KV
High Surge/Pulse Capability.
High insulation to protect against shorts.
ISO 9001:2000 certified and 100% RoHS compliant.
Proudly made RCD (Headquarters HN,USA).
|
212 Premium RCD Carbon Composition 1/2W Resistors
(2 each of all 106 sizes : 10 ohm thru 20 Meg ohm)
2 each of all of the following 107 ohm values:
OHMS
10,
12,
15,
18,
22,
24,
27,
30,
33,
36,
39,
47,
51,
56,
62,
68,
82,
91,
100,
120,
150,
180,
200,
220,
240,
270,
330,
390,
470,
510,
560,
620,
680,
750,
820,
910,
1.0K,
1.2K,
1.5K,
1.8K,
2.2K,
2.4K,
2.7K,
3.0K,
3.3K,
3.6K,
3.9K,
4.7K,
5.1K,
5.6K,
6.2K,
6.8K,
7.5K,
8.2K,
9.1K,
10K,
12K,
15K,
18K,
20K,
22K,
24K,
27K,
30K,
33K,
36K,
39K,
47K,
51K,
56K,
68K,
75K,
82K,
91K,
100K,
120K,
150K,
180K,
220K,
270K,
330K,
360K,
390K,
470K,
510K,
620K,
680K,
750K,
820K,
910K,
1.0M,
1.5M,
2.0M,
2.2M,
2.7M,
3.3M,
3.9M,
4.7M,
5.6M,
6.8M,
8.2M,
10M,
12M,
15M,
18M,
and
20M ohms all at 1/2 Watt.
8 feet of spaghetti tubing
Kit #1C Price: $124.98
Add to Cart at Bottom of Page
|
|
Resistor Kit # 2A :
210 Premium
RCD Carbon Composition Resistors
5% Tolerance
Most Often Needed Post WWII Sizes
This kit contains 210 premium RCD 5% carbon composition resistors....7 each of the thirty (30) most often needed resistor sizes for tube radios, amplifiers, television, etc.
Constuction: Same as Kit # 1A above.
Features: "Classic" vintage resistor appearance and that warm tube sound of yesteryear. Ideal for tube radios, amps, TVs, etc.
Wattage: 1/2 watt rating.
Tolerance: +/- 5%
Operating Temperature Range: -55C to +150C ( this is a full 25 degrees better/higher than most carbon comp resistors, resulting in greater reliability and longer life in high operating temperature environments)
Working Voltage: 350V
Overload Voltage: 700 volts
Peak Pulse Voltage: 10KV
High Surge/Pulse Capability.
High insulation to protect against shorts.
ISO 9001:2000 certified and 100% RoHS compliant.
Proudly made RCD (Headquarters NH,USA).
|
210 Premium RCD Carbon Composition 1/2W Resistors
(7 each of the 30 most often needed sizes)
7 each of all of the following 30 sizes:
7 of 100 ohm at 1/2W Carbon Composition
7 of 150 ohm at 1/2W Carbon Composition
7 of 220 ohm at 1/2W Carbon Composition
7 of 270 ohm at 1/2W Carbon Composition
7 of 330 ohm at 1/2W Carbon Composition
7 of 470 ohm at 1/2W Carbon Composition
7 of 680 ohm at 1/2W Carbon Composition
7 of 1K ohm at 1/2W Carbon Composition
7 of 1.5K ohm 1/2W Carbon Composition
7 of 2.2K ohm 1/2W Carbon Composition
7 of 2.7K ohm 1/2W Carbon Composition
7 of 3.3K ohm 1/2W Carbon Composition
7 of 4.7K ohm 1/2W Carbon Composition
7 of 6.8K ohm 1/2W Carbon Composition
7 of 10K ohm at 1/2W Carbon Composition
7 of 15K ohm at 1/2W Carbon Composition
7 of 22K ohm at 1/2W Carbon Composition
7 of 27K ohm at 1/2W Carbon Composition
7 of 33K ohm at 1/2W Carbon Composition
7 of 47K ohm at 1/2W Carbon Composition
7 of 68K ohm at 1/2W Carbon Composition
7 of 100K ohm 1/2W Carbon Composition
7 of 150K ohm 1/2W Carbon Composition
7 of 220K ohm 1/2W Carbon Composition
7 of 270K ohm 1/2W Carbon Composition
7 of 330K ohm 1/2W Carbon Composition
7 of 470K ohm 1/2W Carbon Composition
7 of 680K ohm 1/2W Carbon Composition
7 of 1M ohm at 1/2W Carbon Composition
7 of 2.2M ohm at 1/2W Carbon Composition
8 feet of spaghetti tubing
Kit # 2A Price: $124.98
Add to Cart at Bottom of Page |
|
Resistor Kit # 2B :
240 Classic 10% Tolerance
Carbon Composition Resistors
by KAMAYA OHM
This kit contains 240 Classic carbon composition resistors .... 8 each of thirty often needed Post WWII ohm sizes.
Construction: Same as Kit 1B above.
Features:
"Classic" vintage resistor appearance and tolerance for that warm tube sound of yesteryear. Ideal for tube amps, radios, TVs, etc.
Improved pulse endurance characteristics compared to carbon-film resistors.
Wattage: 1/2 watt rating.
Tolerance: Classic +/- 10% (the most popular tolerance found in vintage of tube radios)
Operating Temperature Range: -55C to +125C
Limiting Element Voltage: 350V
Isolation Voltage: 500 volts
Predictable and reliable performance.
High insulation to protect against shorts.
100% RoHS compliant.
Quality Production by ISO 9001:14001 certified KAMAYA OHM.
|
240 Classic 10% Carbon Composition 1/2W Resistors
(often needed sizes)
8 each of 30 often needed ohm values:
OHMS
8 of 10 ohm 1/2W carbon composition
8 of 15 ohm 1/2W carbon composition
8 of 82 ohm 1/2W carbon composition
8 of 100 ohm 1/2W carbon composition
8 of 220 ohm 1/2W carbon composition
8 of 270 ohm 1/2W carbon composition
8 of 470 ohm 1/2W carbon composition
8 of 560 ohm 1/2W carbon composition
8 of 820 ohm 1/2W carbon composition
8 of 1K ohm 1/2W carbon composition
8 of 2.2K ohm 1/2W carbon composition
8 of 2.7K ohm 1/2W carbon composition
8 of 3.3K ohm 1/2W carbon composition
8 of 4.7K ohm 1/2W carbon composition
8 of 10K ohm 1/2W carbon composition
8 of 15K ohm 1/2W carbon composition
8 of 18K ohm 1/2W carbon composition
8 of 33K ohm 1/2W carbon composition
8 of 47K ohm 1/2W carbon composition
8 of 68K ohm 1/2W carbon composition
8 of 100K ohm 1/2W carbon composition
8 of 150K ohm 1/2W carbon composition
8 of 270K ohm 1/2W carbon composition
8 of 330K ohm 1/2W carbon composition
8 of 470K ohm 1/2W carbon composition
8 of 680K ohm 1/2W carbon composition
8 of 820K ohm 1/2W carbon composition
8 of 1.0M ohm 1/2W carbon composition
8 of 2.2M ohm 1/2W carbon composition
8 of 22M ohm 1/2W carbon composition
all at 1/2 Watt with the classic 10% tolerance.
8 feet of spaghetti tubing
Kit #2B Price: $124.98
Add to Cart at Bottom of Page
|
|
Resistor Kit # 3 :
200 Premium
RCD Carbon Composition Resistors
5% Tolerance
Most Often Needed Pre-WWII Sizes
This kit contains 200 premium RCD 5% carbon composition, 8 each of the twenty-five (25) most often needed Pre-WWII resistor sizes for tube radios, amplifiers, television, etc.
Constuction: Same as Kit # 1A above.
Features: "Classic" vintage resistor appearance and that warm tube sound of yesteryear. Ideal for tube radios, amps, TVs, etc.
Wattage: 1/2 watt rating.
Tolerance: +/- 5%
Operating Temperature Range: -55C to +150C ( this is a full 25 degrees better/higher than most carbon comp resistors, resulting in greater reliability and longer life in high operating temperature environments)
Working Voltage: 350V
Overload Voltage: 700 volts
Peak Pulse Voltage: 10KV
High Surge/Pulse Capability.
High insulation to protect against shorts.
ISO 9001:2000 certified and 100% RoHS compliant.
Proudly made by RCD (Headquarters NH,USA).
|
200 Premium Carbon Composition 1/2W Resistors
(8 each of 25 most popular Pre-WWII sizes: 100 ohm thru 1 Meg ohm)
8 each of all of the following ohm values:
OHMS
100 ohms carbon composition
150 ohms carbon composition
200 ohms carbon composition
300 ohms carbon composition
510 ohms carbon composition
750 ohms carbon composition
1K ohms carbon composition
1.5K ohms carbon composition
2K ohms carbon composition
3K ohms carbon composition
5.1K ohms carbon composition
7.5K ohms carbon composition
10K ohms carbon composition
15K ohms carbon composition
20K ohms carbon composition
30K ohms carbon composition
51K ohms carbon composition
75K ohms carbon composition
100K ohms carbon composition
150K ohms carbon composition
200K ohms carbon composition
300K ohms carbon composition
510K ohms carbon composition
750K ohms carbon composition
&
1M ohms all at 1/2 Watt.
8 feet of spaghetti tubing
Kit #3 Price: $124.98
Add to Cart at Bottom of Page
|
|
Resistor Kit # 3B :
108 1W Carbon Composition Resistors
Brand New Production
This kit contains 108 1W Carbon Composition resistors .... 2 each of most needed 1W carbon composition sizes 10 ohm thru 10M ohm.
The most needed pre-WW2 and post-WW2 sizes are included, making kit ideal for antique radio repairs and restorations.
Manufacturing Technique: Craftsmanship construction with flat black flame resistant molded plastic shell and mix of Carbon Composition and thick film technology. Slurry of the resistor contains Carbon element which is sprayed onto a whitish rod and fired at high temperature.
Total length of each resistor is 71mm (2 3/4") with body size 5.25mm by 15mm. Non-inductive construction with high energy capability and ability to withstand high pulses. For use in high voltage tube radio/amp/electronics restorations and new builds. Also used high power/ strobe lighting and special welding, auto and medical applications.
Features:
Brand New Production (NOT New Old Stock/NOS)
Wattage: Available at the hard to find but often needed 1 Watt rating.
Ohms: Most needed pre WWII and post WWII resistance sizes 10 ohms thru 10M ohms.
Published Tolerance: +/- 10%
Tolerance "guaranteed" by JustRadios: +/- 5%
Operating Temperature Range: -55C to +155C
Maximum Operating Voltage: 700V.
Maximum (insulation) Voltage: 1000 volts
For High Voltage / High Pulse Applications.
Excellent characteristics against high voltage surge current.
High insulation to protect against shorts.
Black tubular body with wattage, tolerance and ohm resistance value marked on resistor for easy identification.
Negative Temperature Coefficient (which means that as the temperature of the resistor increases the resistance decreases).
ROHS compliant with Pb free terminations.
Made by ISO 9001/2000/14001, UL, CE, SGS certified manufacturer.
|
108 1W 10% Carbon Composition Resistors
(2 each of most needed 1W sizes : 10 ohm thru 10Meg ohm)
2 each of all of the following fifty-four (54) ohm values:
OHMS
10 ohms,
15 ohms,
33 ohms,
47 ohms,
68 ohms,
100 ohms,
150 ohms,
200 ohms,
220 ohms,
270 ohms,
330 ohms,
470 ohms,
500 ohms,
680 ohms,
1.0K ohms,
1.5K ohms,
2.0K ohms,
2.2K ohms,
2.7K ohms,
3.3K ohms,
3.9K ohms,
4.7K ohms,
5.0K ohms,
6.8K ohms,
10K ohms,
15K ohms,
20K ohms,
22K ohms,
25K ohms,
27K ohms,
30K ohms,
33K ohms,
39K ohms,
47K ohms,
50K ohms,
75K ohm,
100K ohms,
150K ohms,
200K ohms,
220K ohms,
250K ohms,
270K ohms,
330K ohms,
470K ohms,
500K ohms,
680K ohms,
1.0M ohms,
1.5M ohms,
2.0M ohms,
2.2M ohms,
2.7M ohms,
3.3M ohms,
4.7M ohms,
and
10M ohms
all at 1 Watt.
8 feet of spaghetti tubing
Kit #3B Price: $124.98
Add to Cart at Bottom of Page
|
|
Resistor Kit # 3C :
108 2W Carbon Composition Resistors
Brand New Production
This kit contains 108 2W Carbon Composition resistors .... 3 each of most needed 2W carbon composition sizes 10 ohm thru 2.2M ohm.
The most needed sizes are included, making kit ideal for antique radio repairs and restorations.
Manufacturing Technique: Craftsmanship construction with flat black flame resistant molded plastic shell and mix of Carbon Composition and thick film technology. Slurry of the resistor contains Carbon element which is sprayed onto a whitish rod and fired at high temperature.
Total length of each resistor is 84mm (3 3/8") with body size 6.5mm by 18mm. Non-inductive construction with high energy capability and ability to withstand high pulses. For use in high voltage tube radio/amp/electronics restorations and new builds. Also used high power/ strobe lighting and special welding, auto and medical applications.
Features:
Brand New Production (NOT New Old Stock/NOS)
Wattage: Available at the hard to find but often needed 2 Watt rating.
Ohms: Most needed resistance sizes 10 ohms thru 2.2M ohms.
Published Tolerance: +/- 10%
Tolerance "guaranteed" by JustRadios: +/- 5%Operating Temperature Range: -55C to +155C
Working Voltage: 500V.
Overload Voltage: 1000 volts
For High Voltage / High Pulse Applications.
Excellent characteristics against high voltage surge current.
High insulation to protect against shorts.
Black tubular body with wattage, tolerance and ohm resistance value marked on resistor for easy identification.
Negative Temperature Coefficient (which means that as the temperature of the resistor increases the resistance decreases).
ROHS compliant with Pb free terminations.
Made by ISO 9001/2000/14001, UL, CE, SGS certified manufacturer.
|
108 2W 10% Carbon Composition Resistors
(3 each of most needed 2W sizes : 10 ohm thru 2.2 Meg ohm)
3 each of all of the following thirty-six (36) ohm values:
OHMS
10 ohms,
15 ohms,
22 ohms,
33 ohms,
47 ohms,
68 ohms,
100 ohms,
150 ohms,
220 ohms,
270 ohms,
330 ohms,
470 ohms,
680 ohms,
1.0K ohms,
1.5K ohms,
2.2K ohms,
2.7K ohms,
3.3K ohms,
4.7K ohms,
6.8K ohms,
8.2K ohms,
10K ohms,
15K ohms,
22K ohms,
27K ohms,
33K ohms,
47K ohms,
68K ohms,
100K ohms,
150K ohms,
220K ohms,
330K ohms,
470K ohms,
680K ohms,
1.0M ohms and
2.2M ohms,
all at 2 Watt.
8 feet of spaghetti tubing
Kit #3C Price: $149.99
Add to Cart at Bottom of Page
|
|
Resistor Kit # 4 : 750 Flame Proof Carbon Film 1/2W Resistors
Most Often Needed
Post-WWII Ohm Sizes
Superor heat and pulse resistance. Flame proof painting.
This kit contains 750 high quality flame proof carbon film resistors ..... 25 each of the 30 most often needed post-WWII sizes
Construction: The flame proof carbon film resistor is made by placing the carbon film/layer on a ceramic substrate. The carbon film acts as the resistive material to the electric current. A flame proof coating is then applied.
Total length of each 1/2 watt resistor is 59mm with body size 3.2mm by 9mm.
Resistor Features:
Wattage: 1/2 Watt
Ohms: Kit contains the 25 each of the thirty most often needed (post-WWII) resistor sizes.
Tolerance: +/- 5%
Operating Temperature Range: -55C to +155C
Working Voltage: 350V with maximum overload voltage of 700V.
Superor heat resistance, Superior pulse resistance, Flame proof painting.
High voltage "normal" size body type. NOT the cheaper, low voltage "small" body type.
Solder plated copper wire axial leads.
ISO 9002 & UKAS certified and 100% RoHS compliant.
|
750 Flame Proof Carbon Film 1/2W Resistors
(post WWII sizes)
(25 each of the 30 most often needed sizes)
25 of 100 ohm 1/2W
25 of 150 ohm 1/2W
25 of 220 ohm 1/2W
25 of 270 ohm 1/2W
25 of 330 ohm 1/2W
25 of 470 ohm 1/2W
25 of 680 ohm 1/2W
25 of 1,000 ohm 1/2W
25 of 1,500 ohm 1/2W
25 of 2,200 ohm 1/2W
25 of 2,700 ohm 1/2W
25 of 3,300 ohm 1/2W
25 of 4,700 ohm 1/2W
25 of 6,800 ohm 1/2W
25 of 10,000 ohm 1/2W
25 of 15,000 ohm 1/2W
25 of 22,000 ohm 1/2W
25 of 27,000 ohm 1/2W
25 of 33,000 ohm 1/2W
25 of 47,000 ohm 1/2W
25 of 68,000 ohm 1/2W
25 of 100,000 ohm 1/2W
25 of 150,000 ohm 1/2W
25 of 220,000 ohm 1/2W
25 of 270,000 ohm 1/2W
25 of 330,000 ohm 1/2W
25 of 470,000 ohm 1/2W
25 of 680,000 ohm 1/2W
25 of 1,000,000 ohm 1/2W
25 of 2,200,000 ohm 1/2W
8 feet of spaghetti tubing
Kit #4 Price: $69.99
Add to Cart at Bottom of Page
|
Resistor Kit # 5 : 610 Precision 1% Metal Film 1/2 Watt Resistors
This kit contains 610 high quality precision half watt Metal Film resistors .... 10 each of sixty-one (61) popular sizes, 10 ohm thru 1M ohm .
Construction: Constructed of a resistive element of a very thin layer of metal alloy vacuum deposited on a high-thermal conductive ceramic rod. This technology is able to support accurate characteristics over a very broad resistance range. Solder plated copper lead wires for easy soldering. Length of each resistor is 60mm with body size 3.2mm by 9mm.
Features:
Wattage: 1/2 watt rating.
Tolerance: +/- 1%
Operating Temperature Range: -55C to +155C
Working Voltage: 350 volts
Maximum Overload Voltage: 700 volts
Temperature Coefficient of Resistance: +/- 50 PPM/C
Extremely precise and stable resistor suitable for: test equipment, scientific equipment, Hi-end receivers, tuners, etc.
Low temperature coefficient for high stability of resistance as temperature changes.
High voltage "normal" size body type. NOT the cheaper, low voltage "small" body type.
Very quiet and precise.
Meet American military specification MIL-R-10509F.
ISO 9002, UKAS & BSI certified and 100% RoHS compliant.
|
610 Precision Metal Film 1/2W Resistors
(10 each of all our sizes 10 ohm thru 1 Meg ohm
- The sixty-one ohm values included in this kit:
10ohm,
12ohm,
15ohm,
18ohm,
22ohm,
27ohm,
33ohm,
39ohm,
47ohm,
56ohm,
68ohm,
82ohm,
100ohm,
120ohm,
150ohm,
180ohm,
220ohm,
270ohm,
330ohm,
390ohm,
470ohm,
560ohm,
680ohm,
820ohm,
1,000ohm,
1,200ohm,
1,500ohm,
1,800ohm,
2,200ohm,
2,700ohm,
3,300ohm,
3,900ohm,
4,700ohm,
5,600ohm,
6,800ohm,
8,200ohm,
10,000ohm,
12,000ohm,
15,000ohm,
18,000ohm,
22,000ohm,
27,000ohm,
33,000ohm,
39,000ohm,
47,000ohm,
56,000ohm,
68,000ohm,
82,000ohm,
100,000ohm,
120,000ohm,
150,000ohm,
180,000ohm,
220,000ohm,
270,000ohm,
330,000ohm,
390,000ohm,
470,000ohm,
560,000ohm,
680,000ohm,
820,000ohm
&
1,000,000ohms all at 1/2 Watt.
- 8 feet of spaghetti tubing
Kit #5 Price: $75.00
Add to Cart at Bottom of Page
|
|
Resistor Kit # 6 : 600 Precision 1% Metal Film 1/2 Watt Resistors
Most Often Needed Sizes
This kit contains 600 high quality precision half watt Metal Film resistors .... 20 each of the thirty most often needed sizes..
Resistor Construction: Same as Kit # 5 above.
Resistor Features: Wattage: 1/2 watt rating.
Tolerance: +/- 1%
Operating Temperature Range: -55C to +155C
Working Voltage: 350 volts
Maximum Overload Voltage: 700 volts
Temperature Coefficient of Resistance: +/- 50 PPM/C
Extremely precise and stable resistor suitable for: test equipment, scientific equipment, Hi-end receivers, tuners, etc.
Low temperature coefficient for high stability of resistance as temperature changes.
High voltage "normal" size body type. NOT the cheaper, low voltage "small" body type.
Very quiet and precise.
Meet American military specification MIL-R-10509F.
ISO 9002, UKAS & BSI certified and 100% RoHS compliant.
|
600 Precision Metal Film 1/2W Resistors
(20 each of the 30 most often needed sizes for audio/video circuits
20 each of all of the following 30 values:
20 of 100 ohm at 1/2W
20 of 150 ohm at 1/2W
20 of 220 ohm at 1/2W
20 of 270 ohm at 1/2W
20 of 330 ohm at 1/2W
20 of 470 ohm at 1/2W
20 of 680 ohm at 1/2W
20 of 1,000 ohm at 1/2W
20 of 1,500 ohm at 1/2W
20 of 2,200 ohm at 1/2W
20 of 2,700 ohm at 1/2W
20 of 3,300 ohm at 1/2W
20 of 4,700 ohm at 1/2W
20 of 6,800 ohm at 1/2W
20 of 8,200 ohm at 1/2W
20 of 10,000 ohm at 1/2W
20 of 15,000 ohm at 1/2W
20 of 22,000 ohm at 1/2W
20 of 27,000 ohm at 1/2W
20 of 33,000 ohm at 1/2W
20 of 47,000 ohm at 1/2W
20 of 68,000 ohm at 1/2W
20 of 100,000 ohm at 1/2W
20 of 150,000 ohm at 1/2W
20 of 220,000 ohm at 1/2W
20 of 270,000 ohm at 1/2W
20 of 330,000 ohm at 1/2W
20 of 470,000 ohm at 1/2W
20 of 680,000 ohm 1/2W
20 of 1,000,000 ohm 1/2W
8 feet of spaghetti tubing
Kit #6 Price: $75.00
Add to Cart at Bottom of Page
|
|
Resistor Kit # 7 : 595 Metal Oxide / Carbon Film
1 Watt (Flame Proof) Resistors
High reliability. High Stability. Flame Proof Coating.
A "practical replacement" for Carbon Composition Resistors.
Never run short of the resistor size you need. This kit contains 595 top quality flame-proof metal oxide & carbon film resistors .... 7 each of all eighty-five (85) sizes 1 ohm thru 20M ohm.
Construction: Resistance element is formed by the oxidation reaction of a vapor or spray of tin chloride or tin-oxide film over a high thermal conductive rod. A flame proof coating is then applied.
Total length of each 1 watt resistor is 70mm with body size 4.5mm by 11mm. *680K and over are flame-proof carbon film.
Resistor Features:
Wattage: 1 Watt ( Replace your 1/2W carbon comp with 1W metal oxide ).
Tolerance: +/- 5%
Operating Temperature Range: -55C to +155C
Working Voltage: For Metal Oxide working voltage is 350V with maximum overload voltage of 600V. For carbon film the working voltage is 500V with overload voltage of 1000V.
Excellent resistor for use in high power circuits such as tube radios, amps, TVs, etc.
High stability and high reliability under diverse conditions and high temperatures. Ideal for use in tube electronics.
Flame proof coating.
A practical replacement for 1/2W carbon composition resistors.
High voltage "normal" size body type. NOT the cheaper, low voltage "small" body type.
Solder plated copper wire axial leads.
ISO 9002 & UKAS certified and 100% RoHS compliant.
|
595 Flame Proof 1 Watt Resistors
(7 each of each and every size 1 ohm thru 20 Meg ohm )
- 7 each of all of the following eighty-five (85) ohm values:
OHMS
1,
1.5,
2.2,
3.3,
4.7,
6.8,
10,15,
22,
33,
47,
75,
100,
120,
150,
180,
200,
220,
250,
270,
330,
390,
470,
500,
560,
680,
750,
820,
1.0K,
1.2K,
1.5K,
1.8K,
2.0K,
2.2K,
2.5K,
2.7K,
3.3K,
3.9K,
4.7K,
5.0K,
5.6K,
6.8K,
8.2K,
10K,
12K,
15K,
18K,
20K,
22K,
25K,
27K,
30K,
33K,
40K,
47K,
50K,
56K,
68K,
75K,
82K,
100K,
120K,
150K,
180K,
200K,
220K,
250K,
270k,
330K,
390K,
470K,
500K,
680K*,
820K,
1.0M,
1.5M,
2.0M,
2.2M,
2.4M,
3.3M,
4.7M,
5.1M,
6.8M,
10M,
and 20M
ohms
all at 1 Watt.
- 8 feet of spaghetti tubing
Kit # 7 Price: $89.99
Add to Cart at Bottom of Page
|
|
Resistor Kit # 8A : 600 Metal Oxide 1W (Flame Proof) Resistors
Most Often Needed
Post-WWII Ohm Sizes
High reliability. High Stability. Flame Proof Coating.
A "popular replacement" for Carbon Composition Resistors.
This kit contains 600 high quality flame proof metal oxide/carbon film resistors ..... 20 each of the 30 most often needed post-WWII sizes
Highly stable and reliable, these resistors are "popular replacement" for carbon composition resistors.
Construction: Resistance element is formed by the oxidation reaction of a vapor or spray of tin chloride or tin-oxide film over a high thermal conductive rod. A flame proof coating is then applied.
Total length of each 1 watt resistor is 70mm with body size 4.5mm by 11mm. *680K and over are flame-proof carbon film type.
Resistor Features:
Wattage: 1 Watt ( Replace your 1/2W carbon comp with 1W metal oxide ).
Ohms: Kit contains the 20 each of the thirty most often needed (post-WWII) resistor sizes.
Tolerance: +/- 5%
Operating Temperature Range: -55C to +155C
Working Voltage: For Metal Oxide working voltage is 350V with maximum overload voltage of 600V. For carbon film the working voltage is 500V with overload voltage of 1000V.
Excellent resistor for use in high power circuits such as tube radios, amps, TVs, etc.
High stability and high reliability under diverse conditions and high temperatures. Ideal for use in tube electronics.
Flame proof coating.
A popular replacement for 1/2 watt carbon composition resistors.
High voltage "normal" size body type. NOT the cheaper, low voltage "small" body type.
Solder plated copper wire axial leads.
ISO 9002 & UKAS certified and 100% RoHS compliant.
|
600 Metal Oxide 1W Resistors
(post WWII sizes)
(20 each of the 30 most often needed sizes)
20 of 100 ohm at 1W
20 of 150 ohm at 1W
20 of 220 ohm at 1W
20 of 270 ohm at 1W
20 of 330 ohm at 1W
20 of 470 ohm at 1W
20 of 680 ohm at 1W
20 of 1,000 ohm at 1W
20 of 1,500 ohm at 1W
20 of 2,200 ohm at 1W
20 of 2,700 ohm at 1W
20 of 3,300 ohm at 1W
20 of 4,700 ohm at 1W
20 of 6,800 ohm at 1W
20 of 10,000 ohm at 1W
20 of 15,000 ohm at 1W
20 of 22,000 ohm at 1W
20 of 27,000 ohm at 1W
20 of 33,000 ohm at 1W
20 of 47,000 ohm at 1W
20 of 68,000 ohm at 1W
20 of 100,000 ohm at 1W
20 of 150,000 ohm at 1W
20 of 220,000 ohm at 1W
20 of 270,000 ohm at 1W
20 of 330,000 ohm at 1W
20 of 470,000 ohm at 1W
20 of 680,000 ohm 1W*
20 of 1,000,000 ohm 1W
20 of 2,200,000 ohm 1W
8 feet of spaghetti tubing
Kit #8A Price: $89.99
Add to Cart at Bottom of Page
|
|
Resistor Kit # 8B : 625 Metal Oxide 1W (Flame Proof) Resistors
Most Often Needed Pre-WWII Ohm Sizes
High reliability. High Stability. Flame Proof Coating.
A "favourite replacement" for Carbon Composition Resistors.
If you restore tube radios from the 1920's and 30's you will need resistor sizes/ ohm values in this kit. This kit contains 625 high quality flame proof resistors ..... 25 each of the 25 most often needed pre-WWII resistor sizes used in vintage tube radios. This kit contains "hard to find" pre-WWII ohm values such as 500 ohms, 5K ohms, 25K ohms, 500K ohms etc.
Highly stable and reliable, 1W metal oxide/carbon film resistors are "favourite replacement" for carbon composition resistors.
Construction: Resistance element is formed by the oxidation reaction of a vapor or spray of tin chloride or tin-oxide film over a high thermal conductive rod. A flame proof coating is then applied.
Total length of each 1 watt resistor is 70mm with body size 4.5mm by 11mm. *Sizes over 500K are flame-proof carbon film type.
Features:
Wattage: 1 Watt ( Replace your 1/2W carbon comp with 1W metal oxide ).
Ohms: Kit contains the twenty-four each of the 25 most often needed (pre-WWII) resistor sizes.
Tolerance: +/- 5%
Operating Temperature Range: -55C to +155C
Working Voltage: For Metal Oxide working voltage is 350V with maximum overload voltage of 600V. For carbon film the working voltage is 500V with overload voltage of 1000V.
Excellent resistor for use in high power circuits such as tube radios, amps, TVs, etc.
High stability and high reliability under diverse conditions and high temperatures. Ideal for use in tube electronics.
Flame proof coating.
High voltage "normal" size body type. NOT the cheaper, low voltage "small" body type.
A favourite replacement for half watt carbon composition resistors.
Solder plated copper wire axial leads.
ISO 9002 & UKAS certified and 100% RoHS compliant.
|
625 Metal Oxide 1 Watt Resistors
(Pre WWII sizes)
(25 each of the twenty-five most often needed sizes)
- 25 of 100 ohm at 1W
- 25 of 150 ohm at 1W
- 25 of 200 ohm at 1W
- 25 of 250 ohm at 1W
- 25 of 500 ohm at 1W
- 25 of 1,000 ohm at 1W
- 25 of 1,500 ohm at 1W
- 25 of 2,000 ohm at 1W
- 25 of 2,500 ohm at 1W
- 25 of 5,000 ohm at 1W
- 25 of 10,000 ohm at 1W
- 25 of 15,000 ohm at 1W
- 25 of 20,000 ohm at 1W
- 25 of 25,000 ohm at 1W
- 25 of 30,000 ohm at 1W
- 25 of 40,000 ohm at 1W
- 25 of 50,000 ohm at 1W
- 25 of 75,000 ohm at 1W
- 25 of 100,000 ohm at 1W
- 25 of 150,000 ohm at 1W
- 25 of 200,000 ohm at 1W
- 25 of 250,000 ohm at 1W
- 25 of 500,000 ohm at 1W
- 25 of 1,000,000 ohm 1W
- 25 of 2,000,000 ohm 1W
- 8 feet of spaghetti tubing
Kit # 8B Price: $89.99
Add to Cart at Bottom of Page
|
Resistor Kit # 9A : 625 Carbon Film 1W Resistors
Most Often Needed Pre-WWII Ohm Sizes
High reliability. High Stability.
A "economical replacement" for Carbon Composition Resistors.
If you restore tube radios from the 1920's and 30's you will require the resistor sizes/ ohm values in this kit. This kit contains 625 carbon film resistors ..... 25 each of the 25 most often needed pre-WWII resistor sizes used in vintage tube radios. This kit contains "hard to find" pre-WWII ohm values such as 500 ohms, 5K ohms, 25K ohms, 500K ohms etc.
Highly stable and reliable, 1W carbon film resistors are an economical for carbon composition resistors.
Construction: The carbon film resistor is made by placing the carbon film/layer on a ceramic substrate. The carbon film acts as the resistive material to the electric current.
Total length of each 1 watt resistor is 70mm with body size 4.3mm by 11mm.
Resistor Features:
Wattage: 1 Watt ( Replace your 1/2W carbon comp with 1W metal oxide ).
Ohms: Kit contains the 25 each of the 25 most often needed (post-WWII) resistor sizes.
Tolerance: +/- 5%
Operating Temperature Range: -55C to +155C
Working Voltage: 500V with maximum overload voltage of 1000V.
High stability, high reliability and economical priced. Ideal for use in tube and transistor electronics.
An economical replacement for 1/2 watt carbon composition resistors.
High voltage "normal" size body type. NOT the cheaper, low voltage "small" body type.
Solder plated copper wire axial leads.
ISO 9002 & UKAS certified and 100% RoHS compliant.
|
625 Carbon Film 1 Watt Resistors
(Pre WWII sizes)
(25 each of the twenty-five most often needed sizes)
- 25 of 100 ohm 1W
- 25 of 150 ohm 1W
- 25 of 200 ohm 1W
- 25 of 250 ohm 1W
- 25 of 500 ohm 1W
- 25 of 1,000 ohm 1W
- 25 of 1,500 ohm 1W
- 25 of 2,000 ohm 1W
- 25 of 2,500 ohm 1W
- 25 of 5,000 ohm 1W
- 25 of 10,000 ohm 1W
- 25 of 15,000 ohm 1W
- 25 of 20,000 ohm 1W
- 25 of 25,000 ohm 1W
- 25 of 30,000 ohm 1W
- 25 of 40,000 ohm 1W
- 25 of 50,000 ohm 1W
- 25 of 75,000 ohm 1W
- 25 of 100,000 ohm 1W
- 25 of 150,000 ohm 1W
- 25 of 200,000 ohm 1W
- 25 of 250,000 ohm 1W
- 25 of 500,000 ohm 1W
- 25 of 1,000,000 ohm 1W
- 25 of 2,000,000 ohm 1W
- 8 feet of spaghetti tubing
Kit # 9A Price: $69.99
Add to Cart at Bottom of Page
|
|
Resistor Kit # 9B : 600 Carbon Film 1W Resistors
Most Often Needed
Post-WWII Ohm Sizes
High reliability. High Stability.
An "economical replacement" for Carbon Composition Resistors.
This kit contains 600 high quality carbon film resistors ..... 20 each of the 30 most often needed post-WWII sizes
Highly stable and reliable, these resistors are an "economical replacement" for carbon composition resistors.
Construction: The carbon film resistor is made by placing the carbon film/layer on a ceramic substrate. The carbon film acts as the resistive material to the electric current.
Total length of each 1 watt resistor is 70mm with body size 4.3mm by 11mm.
Resistor Features:
Wattage: 1 Watt ( Replace your 1/2W carbon comp with 1W metal oxide ).
Ohms: Kit contains the 20 each of the thirty most often needed (post-WWII) resistor sizes.
Tolerance: +/- 5%
Operating Temperature Range: -55C to +155C
Working Voltage: 500V with maximum overload voltage of 1000V.
High stability, high reliability and economical priced. Ideal for use in tube and transistor electronics.
An economical replacement for 1/2 watt carbon composition resistors.
High voltage "normal" size body type. NOT the cheaper, low voltage "small" body type.
Solder plated copper wire axial leads.
ISO 9002 & UKAS certified and 100% RoHS compliant.
|
600 Carbon Film 1W Resistors
(post WWII sizes)
(20 each of the 30 most often needed sizes)
20 of 100 ohm 1W
20 of 150 ohm 1W
20 of 220 ohm 1W
20 of 270 ohm 1W
20 of 330 ohm 1W
20 of 470 ohm 1W
20 of 680 ohm 1W
20 of 1,000 ohm 1W
20 of 1,500 ohm 1W
20 of 2,200 ohm 1W
20 of 2,700 ohm 1W
20 of 3,300 ohm 1W
20 of 4,700 ohm 1W
20 of 6,800 ohm 1W
20 of 10,000 ohm 1W
20 of 15,000 ohm 1W
20 of 22,000 ohm 1W
20 of 27,000 ohm 1W
20 of 33,000 ohm 1W
20 of 47,000 ohm 1W
20 of 68,000 ohm 1W
20 of 100,000 ohm 1W
20 of 150,000 ohm 1W
20 of 220,000 ohm 1W
20 of 270,000 ohm 1W
20 of 330,000 ohm 1W
20 of 470,000 ohm 1W
20 of 680,000 ohm 1W
20 of 1,000,000 ohm 1W
20 of 2,200,000 ohm 1W
8 feet of spaghetti tubing
Kit #9B Price: $69.99
Add to Cart at Bottom of Page
|
|
Resistor Kit # 10 : 565 Metal Oxide / Carbon Film
1 Watt (Flame Proof) Resistors
(5 or 10 of all sizes)
High reliability. High Stability. Flame Proof Coating.
A "favourite replacement" for Carbon Composition Resistors.
Never run short of the resistor size you need. This kit contains 565 top quality flame-proof 1 watt resistors .... 5 each of all eighty-four (84) sizes 1 ohm thru 10M ohm and an extra 5 each for the 30 "most" needed 30 sizes. In other words... 10 each of the most needed sizes.
Construction: Resistance element is formed by the oxidation reaction of a vapor or spray of tin chloride or tin-oxide film over a high thermal conductive rod. A coating is then applied.
Total length of each 1 watt resistor is 70mm with body size 4.5mm by 11mm. *Sizes over 680K are flame-proof carbon film type.
Resistor Features:
Wattage: 1 Watt ( Replace your 1/2W carbon comp with 1W metal oxide ).
Tolerance: +/- 5%
Operating Temperature Range: -55C to +155C
Working Voltage: For Metal Oxide working voltage is 350V with maximum overload voltage of 600V. For carbon film the working voltage is 500V with overload voltage of 1000V.
Excellent resistor for use in high power circuits such as tube radios, amps, TVs, etc.
High stability and high reliability under diverse conditions and high temperatures. Ideal for use in tube electronics.
Flame proof coating.
High voltage "normal" size body type. NOT the cheaper, low voltage "small" body type.
An economical replacement for one-half watt carbon composition resistors.
Solder plated copper wire axial leads.
ISO 9002 & UKAS certified and 100% RoHS compliant.
|
565 Flame Proof 1 Watt Resistors - 84 different ohm sizes
(5 each of often needed sizes and 10 each of "most" often needed sizes)
5 of 1ohm,
5 of 1.5 ohm,
5 of 2.2 ohm,
5 of 3.3 ohm,
5 of 4.7 ohm,
5 of 6.8 ohm,
5 of 10 ohm,
5 of 15 ohm,
5 of 22ohm,
5 of 33ohm,
5 of 47ohm,
5 of 75ohm,
10 of 100ohm,
5 of 120ohm,
10 of 150ohm,
5 of 180ohm,
5 of 200ohm,
10 of 220ohm,
5 of 250ohm,
10 of 270ohm,
10 of 330ohm.
5 of 390ohm,
10 of 470ohm,
5 of 500ohm,
5 of 560ohm,
10 of 680ohm,
5 of 750ohm,
5 of 820ohm,
10 of 1K ohm,
5 of 1.2K ohm,
10 of 1.5K ohm,
5 of 1.8K ohm,
5 of 2.0K ohm,
10 of 2.2K ohm,
5 of 2.5K ohm,
10 of 2.7K ohm,
10 of 3.3K ohm
5 of 3.9K ohm,
10 of 4.7K ohm,
5 of 5.0K ohm,
5 of 5.6K ohm,
10 of 6.8K ohm,
5 of 8.2K ohm,
10 of 10K ohm,
5 of 12K ohm,
10 of 15K ohm,
5 of 18K ohm,
5 of 20K ohm,
10 of 22K ohm,
5 of 25K ohm,
10 of 27K ohm,
5 of 30K ohm,
10 of 33K ohm,
5 of 40K ohm,
10 of 47K ohm,
5 of 50K ohm,
5 of 56K ohm,
10 of 68K ohm,
5 of 75K ohm,
5 of 82K ohm,
10 of 100K ohm,
5 of 120K ohm,
10 of 150K ohm,
5 of 180K ohm,
5 of 200K ohm,
10 of 220K ohm,
5 of 250K ohm,
10 of 270K ohm,
10 of 330K ohm,
5 of 390K ohm,
10 of 470K ohm,
5 of 500K ohm,
10 of 680K ohm*,
5 of 820K ohm,
10 of 1.0M ohm,
5 of 1.5 ohm,
5 of 2.0M ohm,
5 of 2.2M ohm,
5 of 2.4M ohm,
5 of 3.3M 000ohm,
5 of 4.7M ohm,
5 of 5.1M ohm,
5 of 6.8M ohm,
5 of 10M ohm all at 1 Watt.
8 feet of spaghetti tubing
Kit #10 Price: $89.99
Add to Cart at Bottom of Page
|
|
Resistor Kit # 11 : 400 Metal Oxide / Carbon Film
2 Watt (Flame Proof) Resistors
Never run out of the ohm size you need. These 2W resistors can be used to replace 1/2W, 1W & 2W resistors. This kit contains 400 high quality flame-proof metal oxide / carbon film resistors .... 5 each of all eighty (80) Post WWII sizes 1 ohm thru 10M ohm..
.
Construction: Resistance element is formed by the oxidation reaction of a vapor or spray of tin chloride or tin-oxide film over a high thermal conductive rod. A flame proof coating is then applied.
Total length of each 2 watt resistor is 80mm with body size 5mm by 15mm. *330K and over are flame-proof carbon film type.
Features:
Wattage: 2 Watt (Can be used to replace 1/2W, 1W and 2W resistors).
Tolerance: +/- 5%
Operating Temperature Range: -55C to +155C
Working Voltage: For Metal Oxide working voltage is 350V with maximum overload voltage of 800V. For carbon film the working voltage is 750V with overload voltage of 1500V.
Excellent resistor for use in high power circuits.
High voltage "normal" size body type. NOT the cheaper, low voltage "small" body type.
High stability, superior resistance to heat and high reliability in high voltage applications. Ideal for use in tube radio, amp, TV electronics.
Flame proof coating.
A popular and economical replacement for old carbon composition resistors.
Solder plated copper wire axial leads.
ISO 9002 & UKAS certified and 100% RoHS compliant.
|
400 Flame Proof 2 Watt Resistors
(5 each of 80 sizes: 1 ohm thru 10 Meg ohm)
5 each of all of the following eighty (80) Post WWII ohm values:
1ohm,
1.2ohm,
1.5ohm,
1.8ohm,
2.2ohm,
2.7ohm,
3.3ohm,
3.9ohm,
4.7ohm,
5.6ohm,
6.8ohm,
8.2ohm,
10ohm,
12ohm,
15ohm,
18ohm,
22ohm,
27ohm,
33ohm,
39ohm,
47ohm,
56ohm,
68ohm,
82ohm,
100ohm,
120ohm,
150ohm,
180ohm,
220ohm,
270ohm,
330ohm,
390ohm,
470ohm,
560ohm,
680ohm,
820ohm,
1.0K ohm,
1.2K ohm,
1.5K ohm,
1.8K ohm,
2.2K ohm,
2.7K ohm,
3.3K ohm,
3.9K ohm,
4.7K ohm,
5.6K ohm,
6.8K ohm,
8.2K ohm,
10K ohm,
12K ohm,
15K ohm,
18K ohm,
22K ohm,
27K ohm,
33K ohm,
39K ohm,
47K ohm,
56K ohm,
68K ohm,
82K ohm,
100K ohm,
120K ohm,
150K ohm,
180K ohm,
220K ohm,
270K ohm,
330K ohm,*
390K ohm,
470K ohm,
560K ohm,
680K ohm,
820K ohm,
1.0M ohm,
1.5M ohm,
2.2M ohm,
3.3M ohm,
4.7M ohm,
6.8M ohm,
8.2M ohm
&
10M ohm all at 2 Watt.
8 feet of spaghetti tubing
Resistor Kit #11 Price: $79.99
Add to Cart at Bottom of Page
|
|
Resistor Kit # 11B : 490 Metal Oxide / Carbon Film
2 Watt (Flame Proof) Resistors
This 2 Watt Resistor Kit (KIT 11B) contains all 400 of resistors that are included in the above Kit 11 as well
as an additional 5 each of 18 resistor sizes (90 additional resistors) needed for Pre WWII electronic restorations.
Never run out of the ohm size you need. These 2W resistors can be used to replace 1/2W, 1W & 2W resistors. This kit contains 490 high quality flame-proof metal oxide / carbon film resistors .... 5 each of all 98 Pre & Post WWII sizes 1 ohm thru 10M ohm..
.
Construction: Resistance element is formed by the oxidation reaction of a vapor or spray of tin chloride or tin-oxide film over a high thermal conductive rod. A flame proof coating is then applied.
Total length of each 2 watt resistor is 80mm with body size 5mm by 15mm. *330K and over are flame-proof carbon film type.
Features:
Wattage: 2 Watt (Can be used to replace 1/2W, 1W and 2W resistors).
Tolerance: +/- 5%
Operating Temperature Range: -55C to +155C
Working Voltage: For Metal Oxide working voltage is 350V with maximum overload voltage of 800V. For carbon film the working voltage is 750V with overload voltage of 1500V.
Excellent resistor for use in high power circuits.
High voltage "normal" size body type. NOT the cheaper, low voltage "small" body type.
High stability, superior resistance to heat and high reliability in high voltage applications. Ideal for use in tube radio, amp, TV electronics.
Flame proof coating.
A popular and economical replacement for old carbon composition resistors.
Solder plated copper wire axial leads.
ISO 9002 & UKAS certified and 100% RoHS compliant.
|
490 Flame Proof 2 Watt Resistors
(5 each of 98 sizes: 1 ohm thru 10 Meg ohm)
5 each of all of the following 98 Pre & Post WWII ohm values:
1ohm,
1.2ohm,
1.5ohm,
1.8ohm,
2.2ohm,
2.7ohm,
3.3ohm,
3.9ohm,
4.7ohm,
5.6ohm,
6.8ohm,
8.2ohm,
10ohm,
12ohm,
15ohm,
18ohm,
22ohm,
27ohm,
33ohm,
39ohm,
47ohm,
56ohm,
68ohm,
82ohm,
100ohm, 200ohm,
120ohm,
150ohm,
180ohm,
220ohm, 250ohm,
270ohm,
330ohm,
390ohm,400ohm,
470ohm,
500ohm
560ohm,
680ohm,
820ohm,
1.0K ohm,
1.2K ohm,
1.5K ohm,
1.8K ohm,2K ohm,
2.2K ohm, 2.5K ohm,
2.7K ohm,
3K ohm,
3.3K ohm,
3.9K ohm,4K ohm,
4.7K ohm,5K ohm,
5.6K ohm,
6.8K ohm,
8.2K ohm,
10K ohm,
12K ohm,
15K ohm,
18K ohm,20K ohm,
22K ohm,25K ohm,
27K ohm,
30K ohm,
33K ohm,
39K ohm,40K ohm,
47K ohm,
50K ohm,
56K ohm,
68K ohm,75K ohm,
82K ohm,
100K ohm,
120K ohm,
150K ohm,
180K ohm,200K ohm,
220K ohm,250K ohm,
270K ohm,
330K ohm,*
390K ohm,
470K ohm,500K ohm,
560K ohm,
680K ohm,
820K ohm,
1.0M ohm,
1.5M ohm,2.0M ohm,
2.2M ohm,
3.3M ohm,
4.7M ohm,
6.8M ohm,
8.2M ohm
&
10M ohm all at 2 Watt.
8 feet of spaghetti tubing
Resistor Kit #11B Price: $99.99
Add to Cart at Bottom of Page
|
|
Resistor Kit # 12A : 405 Metal Oxide 2W (Flame Proof) Resistors
(Most often needed post WWII sizes.)
This kit contains 405 metal oxide resistors ..... 15 each of the 27 most often needed post WWII ohm values
Highly stable and reliable, metal oxide resistors are "favourite replacement" for carbon composition resistors.
.
Construction: Resistance element is formed by the oxidation reaction of a vapor or spray of tin chloride or tin-oxide film over a high thermal conductive rod. A flame proof coating is then applied.
Total length of each 2 watt resistor is 80mm with body size 5mm by 15mm. *330K and over are flame-proof carbon film type.
Features:
Wattage: 2 Watt (Can be used to replace 1/2W, 1W and 2W resistors).
Tolerance: +/- 5%
Operating Temperature Range: -55C to +155C
Working Voltage: For Metal Oxide working voltage is 350V with maximum overload voltage of 800V. For carbon film the working voltage is 750V with overload voltage of 1500V.
Excellent resistor for use in high power circuits.
High voltage "normal" size body type. NOT the cheaper, low voltage "small" body type.
High stability, superior resistance to heat and high reliability in high voltage applications. Ideal for use in tube radio, amp, TV electronics.
Flame proof coating.
A practical, economical replacement for old carbon comp resistors.
Solder plated copper wire axial leads.
ISO 9002 & UKAS certified and 100% RoHS compliant.
|
405 Metal Oxide 2W Resistors
Most Often Needed Post WWII Ohm Sizes
(Flame-Proof)
15 of 100 ohm at 2W
15 of 150 ohm at 2W
15 of 220 ohm at 2W
15 of 330 ohm at 2W
15 of 470 ohm at 2W
15 of 680 ohm at 2W
15 of 1,000 ohm at 2W
15 of 1,500 ohm at 2W
15 of 2,200 ohm at 2W
15 of 3,300 ohm at 2W
15 of 4,700 ohm at 2W
15 of 6,800 ohm at 2W
15 of 10,000 ohm at 2W
15 of 15,000 ohm at 2W
15 of 22,000 ohm at 2W
15 of 33,000 ohm at 2W
15 of 47,000 ohm at 2W
15 of 68,000 ohm at 2W
15 of 100,000 ohm at 2W
15 of 150,000 ohm at 2W
15 of 220,000 ohm at 2W
15 of 330,000 ohm* at 2W
15 of 470,000 ohm 2W
15 of 680,000 ohm 2W
15 of 1,000,000 ohm 2W
15 of 1,500,000 ohm 2W
15 of 2,200,000 ohm at 2W
8 feet of spaghetti tubing
Kit #12A Price: $79.99
Add to Cart at Bottom of Page
|
|
Resistor Kit # 12B : 405 Metal Oxide 2W (Flame Proof) Resistors
(Most often needed pre WWII sizes.)
This kit contains 405 metal oxide resistors ..... 15 each of the 27 most often needed pre WWII ohm values
Highly stable and reliable, metal oxide resistors are "favourite replacement" for carbon composition resistors.
.
Construction: Resistance element is formed by the oxidation reaction of a vapor or spray of tin chloride or tin-oxide film over a high thermal conductive rod. A flame proof coating is then applied.
Total length of each 2 watt resistor is 80mm with body size 5mm by 15mm. *250K and over are flame-proof carbon film type.
Features:
Wattage: 2 Watt (Can be used to replace 1/2W, 1W and 2W resistors).
Tolerance: +/- 5%
Operating Temperature Range: -55C to +155C
Working Voltage: For Metal Oxide working voltage is 350V with maximum overload voltage of 800V. For carbon film the working voltage is 750V with overload voltage of 1500V.
Excellent resistor for use in high power circuits.
High voltage "normal" size body type. NOT the cheaper, low voltage "small" body type.
High stability, superior resistance to heat and high reliability in high voltage applications. Ideal for use in tube radio, amp, TV electronics.
Flame proof coating.
A practical, economical replacement for old carbon comp resistors.
Solder plated copper wire axial leads.
ISO 9002 & UKAS certified and 100% RoHS compliant.
|
405 Metal Oxide 2W Resistors
Most Often Needed Pre WWII Ohm Sizes
(Flame-Proof)
15 of 100 ohm at 2W
15 of 150 ohm at 2W
15 of 200 ohm at 2W
15 of 250 ohm at 2W
15 of 400 ohm at 2W
15 of 500 ohm at 2W
15 of 1K ohm at 2W
15 of 1.5K ohm at 2W
15 of 2K ohm at 2W
15 of 2.5K ohm at 2W
15 of 3K ohm at 2W
15 of 5K ohm at 2W
15 of 10K ohm at 2W
15 of 15K ohm at 2W
15 of 20K ohm at 2W
15 of 25K ohm at 2W
15 of 30K ohm at 2W
15 of 40K ohm at 2W
15 of 50K ohm at 2W
15 of 75K ohm at 2W
15 of 100K ohm at 2W
15 of 150K ohm at 2W
15 of 200K ohm at 2W
15 of 250K ohm* at 2W
15 of 500K ohm 2W
15 of 1M ohm 2W
15 of 2M ohm at 2W
8 feet of spaghetti tubing
Kit #12B Price: $79.99
Add to Cart at Bottom of Page
|
|
Resistor Kit # 13 : 120 of Five Watt (5W) Power Resistors
Construction: 5 watt resistors up to 180 ohms are wire-wound. Higher resistance sizes are made of metal oxide. Metal oxide type is made by depositing a tin oxide on a substrate, resulting in good stability. Wire wound type is constructed by wrapping lengths of high resistance wire over an insulated form. Both types are encased in ceramic (a special type of cement) that is heat and moisture resistant. Total length of each 5 watt resistor is 62mm with body size 9mm by 10mm by 22mm and lead length 20mm.
Features: Wattage: 5 Watts
Ohms: 5 ohm to 25,000 ohms
Tolerance: +/- 5%
Operating Temperature Range: -55C to +155C
Working Voltage: Working Voltage is 350V with max overload voltage at 700V.
Highly heat resistant, moisture resistant and high mechanical strength.
Made of non-inflammable materials, so that even if overcurrent flows, there is no self-ignition.
Complies with safety standards such as UL Standard, Electrical Apparatus Control Law, etc.
Solder plated copper wire axial leads.
ISO 9002 & UKAS certified and 100% RoHS compliant.
Combo Kit #13 Price: $69.99
Add to Cart at Bottom of Page
|
120 of 5 Watt Power Resistors
(3 each of all sizes 5 ohm to 25,000 Ohm)
3 of 5 ohms at 5 Watt
3 of 7.5 ohms at 5 Watt
3 of 10 ohms at 5 Watt
3 of 15 ohms at 5 Watt
3 of 20 ohms at 5 Watt
3 of 25 ohms at 5 Watt
3 of 35 ohms at 5 Watt
3 of 40 ohms at 5 Watt
3 of 50 ohms at 5 Watt
3 of 75 ohms at 5 Watt
3 of 100 ohms at 5 Watt
3 of 120 ohms at 5 Watt
3 of 150 ohms at 5 Watt
3 of 200 ohms at 5 Watt
3 of 250 ohms at 5 Watt
3 of 300 ohms at 5 Watt
3 of 350 ohms at 5 Watt
3 of 400 ohms at 5 Watt
3 of 470 ohms at 5 Watt
3 of 500 ohms at 5 Watt
3 of 680 ohms at 5 Watt
3 of 750 ohms at 5 Watt
3 of 820 ohms at 5 Watt
3 of 1.0K ohms at 5 Watt
3 of 1.25K ohm at 5 Watt
3 of 1.5K ohms at 5 Watt
3 of 2.0K ohms at 5 Watt
3 of 2.5K ohms at 5 Watt
3 of 3.0K ohms at 5 Watt
3 of 3.5K ohms at 5 Watt
3 of 4.0K ohms at 5 Watt
3 of 4.7K ohms at 5 Watt
3 of 5.0K ohms at 5 Watt
3 of 6.8K ohms at 5 Watt
3 of 7.5K ohms at 5 Watt
3 of 8.2K ohms at 5 Watt
3 of 10K ohms at 5 Watt
3 of 15K ohms at 5 Watt
3 of 20K ohms at 5 Watt
3 of 25K ohms at 5 Watt
8 feet of spaghetti tubing
|
|
Resistor Kit # 14 : 96 of Ten Watt (10W) Power Resistors
Construction: Ten watt resistors up to 470 ohms are wire-wound. Higher resistance sizes are made of metal oxide. Metal oxide type is made by depositing a tin oxide on a substrate, resulting in good stability. Wire wound type is constructed by wrapping lengths of high resistance wire over an insulated form. Both types are encased in ceramic (a special type of cement) that is heat and moisture resistant. Total length of each 10 watt resistor is 110mm with body size 9mm by 10mm by 50mm.
Features: Wattage: 10 Watts
Ohms: 0.5 ohm to 50,000 ohms
Tolerance: +/- 5%
Operating Temperature Range: -55C to +155C
Working Voltage: Working Voltage is 350V with max overload voltage at 700V.
Highly heat resistant, moisture resistant and high mechanical strength.
Made of non-inflammable materials, so that even if overcurrent flows, there is no self-ignition.
Complies with safety standards such as UL Standard, Electrical Apparatus Control Law, etc.
Solder plated copper wire axial leads.
ISO 9002 & UKAS certified and 100% RoHS compliant.
Combo Kit #14 Price: $79.99
Add to Cart at Bottom of Page
|
96 of 10 Watt Power Resistors
(2 each of all sizes 0.5 ohm to 50,000 Ohm)
2 of 0.5 ohms at 10W
2 of 1 ohms at 10W
2 of 2 ohms at 10W
2 of 3 ohms at 10W
2 of 4 ohms at 10W
2 of 5 ohms at 10W
2 of 6.8 ohms at 10W
2 of 7.5 ohms at 10W
2 of 8.2 ohms at 10W
2 of 10 ohms at 10W
2 of 15 ohms at 10W
2 of 25 ohms at 10W
2 of 30 ohms at 10W
2 of 47 ohms at 10W
2 of 50 ohms at 10W
2 of 68 ohms at 10W
2 of 82 ohms at 10W
2 of 100 ohms at 10W
2 of 120 ohms at 10W
2 of 150 ohms at 10W
2 of 200 ohms at 10W
2 of 250 ohms at 10W
2 of 300 ohms at 10W
2 of 350 ohms at 10W
2 of 400 ohms at 10W
2 of 500 ohms at 10W
2 of 680 ohms at 10W
2 of 750 ohms at 10W
2 of 820 ohms at 10W
2 of 1.0K ohms at 10W
2 of 1.2K ohm at 10W
2 of 1.5K ohms at 10W
2 of 2.0K ohms at 10W
2 of 2.5K ohms at 10W
2 of 2.7K ohms at 10W
2 of 3.0K ohms at 10W
2 of 4.0K ohms at 10W
2 of 4.7K ohms at 10W
2 of 5.0K ohms at 10W
2 of 7.5K ohms at 10W
2 of 10K ohms at 10W
2 of 20K ohms at 10W
2 of 25K ohms at 10W
2 of 30K ohms at 10W
2 of 35K ohms at 10W
2 of 40K ohms at 10W
2 of 45K ohms at 10W
2 of 50K ohms at 10W
8 feet of spaghetti tubing
|
|
| ...
|
|
Heat-Shrink Tubing Kit # 15 : 144 Feet of Heat Shrink Tubing
4 Different Sizes and 11 Different Colors
Heat shrink tubing is useful in a wide variety of applications, such as electrical insulation, color coding, splicing, termination, wire marking, mechanical protection, cable bundling, weather sealing and corrosion, moisture & abrasion protection. If you repair or restore electronics the use of heat shrink tubing is "a must". Insulating the leads of capacitors, resistors and other electronic parts and wires help reduce the chance of dangerous short circuits. Short circuits can result in (potentially fatal) electric shocks and fires. Also, if your radio, TV or other electrical appliance develops a short ... it will work poorly or not at all.
Why Choose this Heat Shrink Tubing Kit
You will receive the correct sizes/diameters of heat shrink tubing that you need. If you are working on radios/TVs/AMPs a must-have size is 1/16" as this size is large enough to easily slide over capacitor and resistor leads, yet will shrink to a "skin-tight" fit once heated. For various repairs and bundling wires 1/8", 1/4" and 1/2" diameter is often needed. Although black is the most commonly used color of tubing ... using colored heat shrink to color code wires and leads adds a real professional touch to your work. Color coded leads and wires result in a neater layout and makes to troubleshooting much easier. To properly color code your restorations this kit includes ll colors... red, yellow, green, white, gray, blue, purple, brown, orange, clear and black. The tubing in this kit is a flame retardant and is UL/CSA safety approved and ISO certified. Beware of other heat shrink tubing ! ... some types of heat shrink contain ingredients/chemicals and give of dangerous fumes when heated. The heat-shrink tubing in this kit is safe for you to use and is environmentally friendly.
Kit #15 Price: $49.99
Add to Cart at Bottom of Page
.
|
144 Feet of Heat-Shrink Tubing (4 sizes & 11 Colors)
16 feet of 1/16" in Black
8 feet of 1/16" in Red
8 feet of 1/16" in White
8 feet of 1/16" in Blue
8 feet of 1/16" in Grey
8 feet of 1/16" in Green
8 feet of 1/16" in Orange
8 feet of 1/16" in Yellow
8 feet of 1/16" in Purple
8 feet of 1/16" in Brown
8 feet of 1/16" in Clear
8 feet of 1/8" in Black
8 feet of 1/8" in Red
8 feet of 1/4" in Black
8 feet of 1/4" in Red
8 feet of 1/2" in Black
8 feet of 1/2" in Red
Std Color Coding for Wires
in Tube Radios
Black - All Grounds
Brown - Heaters or Filaments Off Ground
Red - Positive dc Supply Voltage
Orange - Screen Grids of tubes
Yellow - Tube Cathodes
Green - Tube Control Grids: ac Commons
Blue - Tube Plates
Violet - Negative dc Supply Voltage
Gray - ac Supply Leads
White - Bias and AGC/AVC Lines
|
|
Vintage-Style Braided Spaghetti Tubing Kit # 16 : 80 Feet of Braided Silicone-Rubber Spaghetti Tubing
4 Different Sizes and 9 Different Colors
At last…the best of two worlds…a spaghetti tubing that looks like the varnished braided spaghetti tubing of yesteryear originally used in your 1920’s, 30’s and 40’s radios ….but a spaghetti tubing that is new production and made to today’s standards to meet and surpass modern day electrical safety concerns. And talk about safety performance….is has an operating temperature of -55C to +200C and a voltage rating of 4000 volts! RoHS compliant and UL approved of course. This tubing is made of a closely woven electrical grade inner fibreglass sleeve coated with an electrical grade braided silicone rubber.
This spaghetti tubing has excellent electrical, chemical and oil resistance properties, excellent heat stability and super flexibility for ease of push-up and recovery. It has excellent resistance to oils, acids and alkalis and solvents. Although we carry this spaghetti for use in vintage hand wired tube electronics, this tubing is compatible with virtually all electrical grade insulating varnishes and impregnation systems making it ideally suited for leads and crossovers in fractional and integral horsepower motors, dry or oil filled, transformers generators, welding apparatus, relays and moisture sensitive equipment. Yes, this same tubing is used extensively in consumer appliances, light fixtures, stove, oven and furnace controls as well as relays, breaker panels, switchgear and other commercial and industrial equipment where high electrical performance and superior resistance to mechanical and environmental wear is required.
Although the natural color (most commonly seen) of this tubing is white we also carry this braided spaghetti in hard to find/custom colors black, red, yellow, green, grey, blue, purple and brown…so that you can give your vintage restorations a truly professional look. Using the appropriate colors also makes repairs and trouble shooting easier. The tubing we carry comes in a variety of diameters, namely; 1/16 inch, 1/8 inch, 1/4 inch and 1/2 inch. The 1/16” is the perfect size for insulating capacitor and resistor leads. For various repairs and bundling wires 1/8", 1/4" and 1/2" diameter is often required.
Kit #16 Price: $59.99
Add to Cart at Bottom of Page
.
|
80 Feet of Braided Silicone-Rubber Spaghetti Tubing (4 sizes & 9 Colors)
16 feet of 1/16" in Black
8 feet of 1/16" in Red
4 feet of 1/16" in White
4 feet of 1/16" in Blue
4 feet of 1/16" in Grey
4 feet of 1/16" in Green
4 feet of 1/16" in Yellow
4 feet of 1/16" in Purple
4 feet of 1/16" in Brown
4 feet of 1/8" in White
4 feet of 1/8" in Black
4 feet of 1/8" in Red
4 feet of 1/4" in Black
4 feet of 1/4" in White
4 feet of 1/2" in Black
4 feet of 1/2" in Red
Std Color Coding for Wires
in Tube Radios
Black - All Grounds
Brown - Heaters or Filaments Off Ground
Red - Positive dc Supply Voltage
Orange - Screen Grids of tubes
Yellow - Tube Cathodes
Green - Tube Control Grids: ac Commons
Blue - Tube Plates
Violet - Negative dc Supply Voltage
Gray - ac Supply Leads
White - Bias and AGC/AVC Lines
|
|
| ...
|
Resistor Kits for Tube Radios & Electronics
