• Premium quality PPT Metalized Polypropylene film dielectric aluminum foil electrode construction.
• Tubular body outer wrapped with polyester film type and ends sealed with epoxy resin, in non-inductive type.
• Long (40mm) copper-pry axial leaded for easy "under chassis" installation.
• Electrode and lead spot welded, contact resistance is minimized.
• Excellent replacement for paper/wax capacitors in tube radios. Also, Telecommunication instruments, industrial electronics and general electronics equipment.
• Rated Voltage: 630 Volts and 1000 Volts DC
• Capacitance Sizes: 0.0005 uF; 0.001 uF; 0.0015 uF; 0.002 uF; 0.0025 uF; 0.003 uF; 0.0035; 0.004 uF; 0.005 uF; 0.006 uF; 0.007 uF; 0.008 uF (for over 0.008uF our 630V & 1000V metalized polyester capacitors are recommended for tube radios)
• Excellent long term stability.
• Good solderability.
• Test Voltage: 200% of Rated Voltage for 60 seconds
• Operating temp. range:-40 to +85C.
• Capacitance tolerance +/- 10%.
• Stable against high frequency and change of temperature.
• Linear and slightly neg temperature coefficient.
• Dissipation Factor at 1KHz =< 1%
• Insulation Resistance: 50000 Mohm
• Low dissipation factor and high insulation resistance.
• ISO 9002 & 9001 certified

Metalized Polypropylene Capacitors- 630V & 1000VAxial Tubulars
Metallized Polyester Film Capacitors - 630V & 1000VAxial Tubulars

Metal-Foil Polypropylene Capacitors - 630V Orange Dips
Metallized Polyester Film Capacitors - 630V Orange Dips
Metallized Polypropylene Capacitors- 1600V Orange Dips

Silver MICA Capacitors- 500 Volts

Mylar Film Capacitors - 630 Volt
Ceramic Disc Capacitors - 1600 Volt

High Voltage Electrolytic Capacitors- Radials
High Voltage Electrolytic Capacitors- Axials

X1/Y2 Disc Safety Capacitors - 250VAC
Y2 Film Safety / Interference Suppression Capacitors - 250VAC
X2 Film Safety / Interference Suppression Capacitors - 275VAC