Features and Specifications
:- Premium quality PPN Polypropylene Metal-Foil construction.
- Electrode and lead spot welded, equivalent series resistance (ESR) minimized.
- Excellent replacement for paper/wax capacitors in tube radios. Also, Telecommunication equipment, industrial electronics and general electronics equipment.
- Rated Voltage: 630 Volts DC
- Epoxy dipped Orange Dips for superior heat, moisture and solvent resistance.
- Non-Inductively Wound
- EXTRA Long (30mm) copper-pry radial lead wires for easy "under chassis" installation.
- Good solderability.
- Test Voltage: 200% of Rated Voltage for 60 sec (ie 1260 Volts for one minute)
- Operating temp. range:-40 to +85 C.
- Capacitance tolerance +/- 10%.
- Stable against high frequency and change of temperature.
- Capacitance Range: All sizes 0.001uF thru 0.0082uF (for over 0.0082 uF our Metallized Film capacitors are recommended for tube radio applications)
- Low dissipation factor and high insulation resistance
- Dissipation Factor at 1KHz =< 1%
- Insulation Resistance(min) C=<0.1uF:30000Mohm ; C>0.1uF:3000Mohm.uF
- Excellent stability for High Frequency / High Current / Timing Circuit / Temp. Compensation Applications.
- ISO 9002 & 9001 certified.
Other High Voltage Capacitors for Tube Radios
:Metalized Polypropylene Capacitors- 630V Axial Tubulars
Metallized Polyester Film Capacitors - 630V Axial Tubulars
Metal-Foil Polypropylene Capacitors - 630V Orange Dips
Metallized Polyester Film Capacitors - 630V Orange Dips
Metallized Polypropylene Capacitors- 1600V Orange Dips
Silver MICA Capacitors- 500 Volts
Mylar Film Capacitors - 630 Volt
Ceramic Disc Capacitors - 1600 Volt
High Voltage Electrolytic Capacitors- Radials
High Voltage Electrolytic Capacitors- Axials
X1/Y2 Disc Safety Capacitors - 250VAC
Y2 Film Safety / Interference Suppression Capacitors - 250VAC
X2 Film Safety / Interference Suppression Capacitors - 275VAC
Capacitors and Schematics for Antique Tube Radios
