• Construction: High quality duPont MYLAR Polyester Film
• 400 Volt Mylars sold in Bags or 75 (economically priced). 630 Volt Mylars sold in Bags or 50 (economically priced) .
• Sizes Available: 0.001uf; 0.002uF; 0.0022uF; 0.0047uF; 0.005uF; 0.01uF; 0.02uF; 0.022uF; 0.047uF; 0.05uF; 0.1uF
• Made by ISO 9002 & 9001 certified manufacturer / OEM supplier with major customers: CDE, Sony, National, Canon, APC, LG, LEO, Bosch, B&D, Askey and HP.
• Rated Voltages: 400 Volts and 630 Volts
• Test Voltage (TV): 200 % of rated voltage for 60 seconds.
• Epoxy dipped for superior heat, humidity and solvent resistance.
• Long 30mm (over one inch long) radial leads for easy "under chassis" installation.
• Good solderability.
• Operating temp. range:-40 to +85 C.
• Capacitance tolerance +/- 10%.
• Dissipation Factor: less than 0.0075 (at 1KHZ)
• Insulation Resistance: 30.000 M ohm minimum
• Not recommended as substitute for mica or ceramic capacitors re VHF frequencies.
• Superior replacement for old paper/wax capacitors in antique tube radios.
• Good reputation in use with consumer and industrial electronics.

Metalized Polypropylene Capacitors- 630V & 1000V Axial Tubulars
Metallized Polyester Film Capacitors - 630V & 1000V Axial Tubulars

Metal-Foil Polypropylene Capacitors - 630V Orange Dips
Metallized Polyester Film Capacitors - 630V Orange Dips
Metallized Polypropylene Capacitors- 1600V Orange Dips

Silver MICA Capacitors- 500 Volts

Mylar Film Capacitors - 630 Volt
Ceramic Disc Capacitors - 1600 Volt

High Voltage Electrolytic Capacitors- Radials
High Voltage Electrolytic Capacitors- Axials
Single Section Can Electrolytic Capacitors - 500 Volts
Dual Section Can Electrolytic Capacitors - 500 Volts
Capacitor Clamps for Can Electrolytic Capacitors

X1/Y2 AC Rated Disc Safety Capacitors - 250VAC
X2 Film Safety / Interference Suppression Capacitors - 275VAC
Y2 Film Safety / Interference Suppression Capacitors - 250VAC

Heat Shrink (spaghetti) Tubing

Capacitors and Schematics for Antique Tube Radios